Wireless Set No. 46

WS 46 in carrier 22kb

Wireless Set No. 46 in canvas Set Carrier. Note rubber dust cap (left) for sealing the 6-pt socket when not in use, and a similar rubber cap (record disk) holding a label on which frequencies are noted.

Accessories


WS 46 battery carrier 35kb

In the canvas Battery Carrier, which is normally strapped to the operator's back, one operational battery and a spare battery are carried. Junction Box No. 1 (Wireless Set No. 46), is fixed on the outside of the Battery Carrier and has a cable harness for connecting to the No. 46 Set (dark brown cable), two microphone and headgear assemblies and an internal cable for connection to the battery.
WS 46 junction box 53kb

View of No. 46 Set Junction Box No. 1 with lid removed showing various test points.

WS 46 aerial adaptor unit 13kb

The aerial circuit of the No. 46 Set matches only a 7ft 6in aerial. Longer aerials must be connected using the Aerial Adaptor Unit. Two taps are provided: terminal F for connecting a 16ft type "F" rod, and terminal L for connecting Long" aerials exceeding 20ft in length.

Adaptor stowage 39kb

Stowage for Aerial Adaptor Unit in opening flap of canvas Battery Carrier.


Headgear assembly No. 5 24kb

Microphone and receivers, Headgear Assembly No. 5, comprising throat microphone and DRL2 headphones, as used with Wireless Set No. 46.

Plug-in coil unit  15kb

Plug-in coil unit for Wireless Set No. 46. The frequency coverage of the No. 46 Set is divided in 4 ranges selected by plug-in coils: 7.9-9.1MHz (Yellow), 6.4-7.6MHz (White), 5-6MHz (Blue) and 3.6-4.3MHz (Red).

RETURN to Gallery

Wireless for the Warrior
URL homepage: www.wftw.nl